Immigrate to Canada as a Machinist or machining or tooling inspector
Machinists and machining and tooling inspectors are in demand right across Canada and you may be able to secure a Canadian Permanent Residency Visa either with or without a job offer.
There are thousands of Machinists and machining and tooling inspectors just like you moving to Canada. Find out how to join them. Canada needs more Machinists and machining and tooling inspectors. If you are thinking about moving to Canada as a Machinist or machining or tooling inspector, all the information you need is right here.
Machinists and machining and tooling inspectors are wanted in Canada
Did you know that Machinists and machining and tooling inspectors are one of the most in-demand jobs in Canada? Machinists and machining and tooling inspectors are in high demand in all 11 of Canada’s provinces and territories, and as a highly-skilled professional, you can expect to earn between $66870 and $115700 per year.
When considering Canada as your new home, there are not only numerous immigration options for you to choose from, but plenty of job opportunities too.
Jobs in Canada for Machinists and machining and tooling inspectors
One of the biggest questions when moving to Canada is “will I be able to find work as a Machinist or machining or tooling inspector in Canada?”. The simple answer is Yes, you will! (Of course each Machinists and machining and tooling inspectors level of training and experience is a core factor, as is the case in any country.)
Below are answers to some of the most frequently asked questions about jobs in Canada for Machinists and machining and tooling inspectors.
Is There Really a Demand for Machinists and machining and tooling inspectors in Canada?
Yes there is! As mentioned previously, you can immigrate to Canada as an experienced Machinist and machining and tooling inspector with a high chance of finding employment in any of Canada’s 11 provinces. These job opportunities can be found in:
- British Columbia
- New Brunswick
- Newfoundland and Labrador
- Nova Scotia
- Prince Edward Island
Over the next few years, it is estimated that there will be 26000 new jobs created due to expansion and a need for replacement as well as 33000 new positions for graduates and immigrants to fill who want to live and work in Canada.
This is why Canada needs Machinists and machining and tooling inspectors. You really can be moving to Canada as a Machinist or machining or tooling inspector
How Much Do Machinists and machining and tooling inspectors Earn in Canada?
Salaries in Canada are very competitive and, as an experienced Machinist and machining and tooling inspector, you can expect to earn between $66870 and $115700 per year.
How do I search for Machinist and machining and tooling inspector positions in Canada?
Most Machinist and machining and tooling inspector jobs in Canada are advertised online on jobs sites. Often, a code is used to identify Machinist and machining and tooling inspector jobs. These codes are used across Canada to identify all kinds of occupations.
The codes are called NOC codes. The NOC code for Machinist and machining and tooling inspector is 7231. There are a range of positions that are associated with Machinists and machining and tooling inspectors.
These are occupations many Machinists and machining and tooling inspectors also participate in. If you work in or are employed as any of the following positions, you are covered by the overarching noc code of 7231 for Machinists and machining and tooling inspectors
Machinists set up and operate a variety of machine tools to cut or grind metal plastic or other materials to make or modify parts or products with precise dimensions. Machining and tooling inspectors inspect machined parts and tooling in order to maintain quality control standards. They are employed by machinery equipment motor vehicle automotive parts aircraft and other metal products manufacturing companies and by machine shops.;
Further Positions within the term of Machinist and machining and tooling inspector include:
- Aircraft engine parts machinist
- Aircraft machinist
- Apprentice automotive machinist
- Apprentice machinist
- Auto parts machine shop inspector
- Automotive machinist
- Aviation machinist
- Ballistic laboratory machinist
- Bench machinist
- Computer numerical control (CNC) machinist
- Computer-assisted machinist
- Diesel engine machinist
- Differential gear testing machinist
- Dimensional inspector – machine shop
- Electrical machinist
- Experimental machinist
- Firearms machining inspector
- Firearms model maker machinist
- Gear inspector-machinist
- Gear tester-machinist
- General machinist
- Journeyman/woman machinist
- Machine shop charge hand
- Machine shop inspector
- Machined parts inspector
- Machining and tooling inspector
- Machining inspector
- Machinist apprentice
- Maintenance machinist
- Master machinist
- Model maker machinist
- Motion picture equipment machinist
- Mould and core machinist
- Mouldmaking machinist
- Numerically controlled (NC) machinist
- Precision machinist
- Printing press machinist
If your position is on the above list, you have found your relevant NOC Code, it is 7231
How Do I Move to Canada to Live and Work as a Machinist or machining or tooling inspector?
Step 1 : Determine you are eligible to immigrate
The simplest way to do this is to take our free visa assessment. There are more than 80 visa pathways to Canada. Once you take your visa assessment we will be able to guide you as to which is the best path for your particular circumstances.
Step 2: Have Your Qualifications Accredited for Canada
In order to live and work in Canada as a Machinist or machining or tooling inspector, you will need to have your qualifications that you earned outside of Canada accredited and ensure that it is recognized in Canada.
An Educational Credential Assessment (ECA) confirms that your degree, diploma or certificate is both valid and equal to Canadian standards. This is vital as it will allow you to claim the Permanent Residency points for your education and training and might also be required for employment, professional registration within Canada and Canadian immigration services.
Below is a list of designated organizations that are licensed to do your assessment:
- Comparative Education Service – University of Toronto School of Continuing Studies;
- International Credential Assessment Service of Canada;
- World Education Services;
- International Qualifications Assessment Service (IQAS); and
- International Credential Evaluation Service.
Educational and experience requirements for Machinists and machining and tooling inspectors include:
- Completion of secondary school is usually required.
- Completion of a four-year apprenticeship program or a combination of over four years of work experience and industry courses in machining may be required for trade certification.
- Trade certification for sheet metal workers is compulsory in New Brunswick Quebec Ontario Saskatchewan and Alberta and available but voluntary in all other provinces and the territories.
- Trade certification for precision sheet metal set-up operator is available but voluntary in Quebec.
- Red Seal endorsement is also available to qualified sheet metal workers upon successful completion of the interprovincial Red Seal examination.
You may be required to provide a range of documentation and references to prove your abilities and experience during your evaluation process for Canadian Immigration.
Step 3: Start the Migration Process, apply for your Canada Visa
There are many routes you can take when moving to Canada as a Machinist or machining or tooling inspector but we’ve listed the top 4 ways that will give you the greatest chances of success in the application process:
- Express Entry system
- Provincial Nominee Program
- The Rural and Northern Immigration Program
- The Atlantic Immigration Pilot
1. Express Entry
The Express Entry (EE) system is our top choice for moving to Canada as a Machinist or machining or tooling inspector. Not only is it the fastest but it is also one of the simplest ways to immigrate to Canada. With the right age, language skills in French and/or English, qualifications and other criteria you could be moving to Canada fast, you could be on your way to Canada in 6 months.
The first stage in your Canadian Express Entry immigration process is to calculate your Canada Immigration points for Express Entry using the Canadian Comprehensive Ranking System (CRS).
Some of the elements that CRS Points are awarded for include:
- English ability
- French ability
- Your partner’s skills
- Work experience
Take our free online visa assessment for an up to date report on whether you have enough points to move to Canada as a Machinist or machining or tooling inspector from both an Express Entry and Immigration points perspective.
2. Provincial Nominee Program
The Provincial Nominee Program (PNP) allows skilled and semi-skilled immigrants to live and work in Canada. You will need a valid job offer in Canada of at least 1 year for most immigration streams. 11 provinces and territories have their own PNPs, each with their own with specific labor needs.
If your skills match what your chosen province or territory is looking for, you may receive a provincial nomination, which is worth 600 extra Permanent Residency points which means that you’re practically assured of an offer for Canadian permanent residence.
3. The Rural and Northern Immigration Pilot
Seeing as Machinists and machining and tooling inspectors are in-demand you may be eligible to immigrate to Canada through the Rural and Northern Immigration Pilot (RNIP). There are 11 participating communities currently participating in the pilot program. You will need a valid job offer in one of the participating communities to be considered eligible to apply for Canadian permanent residency through the RNIP.
4. The Atlantic Immigration Pilot
The Atlantic Immigration Pilot allows intermediate to highly and semi-skilled foreign workers to move to Canada’s Atlantic provinces and seeing as Machinists and machining and tooling inspectors are in high need in the 4 Atlantic provinces, you may be eligible to apply if you have a valid job offer for at least 1 year.
Step 4: Apply for a Machinist or machining or tooling inspector Job in Canada
As a highly skilled worker, it is not a requirement that you have a job to be able to immigrate to Canada but it will make it faster. It will help with the immigration process as you can earn between 50 and 200 PR points for a valid job offer. This moves you ahead in the pool of candidates, as the more points you have the more chance you have of receiving an invitation in one of the many offer rounds made within the Canada Visa System.
Machinists and machining and tooling inspectors in Canada are described as doing the following:
- Read and interpret engineering drawings blueprints charts and tables or study sample parts to determine machining operation to be performed and plan best sequence of operations
- Compute dimensions and tolerances and measure and lay out work pieces
- Set up operate and maintain a variety of machine tools including computer numerically controlled (CNC) tools to perform precision non-repetitive machining operations such as sawing turning milling boring planing drilling precision grinding and other operations
- Fit and assemble machined metal parts and subassemblies using hand and power tools
- Verify dimensions of products for accuracy and conformance to specifications using precision measuring instruments
- May set up and program machine tools for use by machining tool operators.
- Machining and tooling inspectors
- Verify dimensions of machined parts or tooling using micrometers verniers callipers height gauges optical comparators co-ordinate measuring machines (CMM) or other specialized measuring instruments
- May program CNC machine tools.
- Metal patternmakers
You can expect to see these terms in Job ads in Canada for Machinists and machining and tooling inspectors along with the following common tasks, duties and responsibilities of Machinists and machining and tooling inspectors in Canada.
There has never been a better time to get moving to Canada as a Machinist or machining or tooling inspector.
If you are looking to apply to move to Canada in a different occupation, you can find the information on our Canada Skilled Immigration Guides page.
If you are looking for a job in Canada – you can find a guide on each occupation and the job application procedure for Canada on our Canada Job Guides index.
As mentioned above you will need to attend the Canadian Embassy nearest you during your application process to live in Canada as a Machinist or machining or tooling inspector. You can find the complete list of all Canadian Embassies Worldwide here.