Immigrate to Canada as a Non-destructive tester or inspection technician

Immigrate to Canada as a a Non-destructive tester or inspection technician

Immigrate to Canada as a a Non-destructive tester or inspection technician

Non-destructive testers and inspection technicians are in demand right across Canada and you may be able to secure a Canadian Permanent Residency Visa either with or without a job offer.

 

There are thousands of Non-destructive testers and inspection technicians just like you moving to Canada. Find out how to join them.  Canada needs more Non-destructive testers and inspection technicians.  If you are thinking about moving to Canada as a Non-destructive tester or inspection technician, all the information you need is right here.

Moving to Canada as a Non-destructive tester or inspection technician

Moving to Canada as a Non-destructive tester or inspection technician

Non-destructive testers and inspection technicians are wanted in Canada

Did you know that Non-destructive testers and inspection technicians are one of the most in-demand jobs in Canada? Non-destructive testers and inspection technicians are in high demand in all 11 of Canada’s provinces and territories, and as a highly-skilled professional, you can expect to earn between $73500 and $99600 per year.

 

When considering Canada as your new home, there are not only numerous immigration options for you to choose from, but plenty of job opportunities too.

Jobs in Canada for Non-destructive testers and inspection technicians

One of the biggest questions when moving to Canada is “will I be able to find work as a Non-destructive tester or inspection technician in Canada?”. The simple answer is Yes, you will!  (Of course each Non-destructive testers and inspection technicians level of training and experience is a core factor, as is the case in any country.)

 

Below are answers to some of the most frequently asked questions about jobs in Canada for Non-destructive testers and inspection technicians.

Is There Really a Demand for Non-destructive testers and inspection technicians in Canada?

Yes there is! As mentioned previously, you can immigrate to Canada as an experienced Non-destructive tester and inspection technician with a high chance of finding employment in any of Canada’s 11 provinces. These job opportunities can be found in:

 

  • Alberta
  • British Columbia
  • Manitoba
  • New Brunswick
  • Newfoundland and Labrador
  • Nova Scotia
  • Ontario
  • Prince Edward Island
  • Quebec
  • Saskatchewan

 

Over the next few years, it is estimated that there will be 29000 new jobs created due to expansion and a need for replacement as well as 36000 new positions for graduates and immigrants to fill who want to live and work in Canada.

 

This is why Canada needs Non-destructive testers and inspection technicians.  You really can be moving to Canada as a Non-destructive tester or inspection technician

How Much Do Non-destructive testers and inspection technicians Earn in Canada?

Salaries in Canada are very competitive and, as an experienced Non-destructive tester and inspection technician, you can expect to earn between $73500 and $99600 per year.

How do I search for Non-destructive tester and inspection technician positions in Canada?

Most Non-destructive tester and inspection technician jobs in Canada are advertised online on jobs sites.  Often, a code is used to identify Non-destructive tester and inspection technician jobs.  These codes are used across Canada to identify all kinds of occupations.

 

The codes are called NOC codes.  The NOC code for Non-destructive tester and inspection technician is 2261.  There are a range of positions that are associated with Non-destructive testers and inspection technicians.

 

These are occupations many Non-destructive testers and inspection technicians also participate in.  If you work in or are employed as any of the following positions, you are covered by the overarching noc code of 2261 for Non-destructive testers and inspection technicians

 

Non-destructive testers and inspection technicians operate radiographic ultrasonic liquid penetrant magnetic particle eddy current and similar testing equipment to detect discontinuities in objects of various compositions and materials. They are employed by quality control maintenance and safety departments of manufacturing processing transportation energy and other companies and by private industrial inspection establishments.;

 

Further Positions within the term of Non-destructive tester and inspection technician include:

 

  • Acoustic emission technician
  • Acoustic emission tester
  • Aircraft non-destructive inspection technician
  • Black light technician – non-destructive testing
  • Boiler tester
  • Dye penetrant technician
  • Dye penetrant tester
  • Eddy current technician
  • Eddy current tester
  • Fluorescent penetrant testing technician
  • Fluoroscope tester
  • Forging tester
  • Hydrostatic tester
  • Industrial radiographer
  • Industrial radiographer – radiotelephony
  • Infrared technician
  • Infrared tester
  • Infrared thermographer
  • Infrared thermography technician
  • Liquid penetrant technician – non-destructive testing
  • Liquid penetrant testing technician
  • Magnetic particle technician
  • Magnetic particle tester
  • Magnetic particle testing technician
  • Maintenance technician – non-destructive testing (NDT)
  • Non-destructive examination technician
  • Non-destructive examiner
  • Non-destructive inspection technician
  • Non-destructive inspection tester
  • Non-destructive inspector
  • Non-destructive test technician
  • Non-destructive tester
  • Non-destructive testing maintenance (NDT) technician
  • Non-destructive testing trainee
  • Pipe tester – non-destructive testing
  • Pipeline testing technician – non-destructive testing
  • Pressure tank tester
  • Pressure vessel tester

 

If your position is on the above list, you have found your relevant NOC Code, it is 2261

How Do I Move to Canada to Live and Work as a Non-destructive tester or inspection technician?

Step 1 : Determine you are eligible to immigrate

The simplest way to do this is to take our free visa assessment.  There are more than 80 visa pathways to Canada.  Once you take your visa assessment we will be able to guide you as to which is the best path for your particular circumstances.

Step 2: Have Your Qualifications Accredited for Canada

In order to live and work in Canada as a Non-destructive tester or inspection technician, you will need to have your qualifications that you earned outside of Canada accredited and ensure that it is recognized in Canada.

 

An Educational Credential Assessment (ECA) confirms that your degree, diploma or certificate is both valid and equal to Canadian standards. This is vital as it will allow you to claim the Permanent Residency points for your education and training and might also be required for employment, professional registration within Canada and Canadian immigration services.

 

Below is a list of designated organizations that are  licensed to do your assessment:

 

  • Comparative Education Service – University of Toronto School of Continuing Studies;
  • International Credential Assessment Service of Canada;
  • World Education Services;
  • International Qualifications Assessment Service (IQAS); and
  • International Credential Evaluation Service.

 

Educational and experience requirements for Non-destructive testers and inspection technicians include:

 

  • Completion of secondary school is required.
  • Completion of two years of an approved post-secondary science or engineering program may be required.
  • Public health inspectors employed outside Quebec require certification with the Canadian Institute of Public Health Inspectors.
  • Occupational health and safety officers may require certification with the Board of Canadian Registered Safety Professionals (BCRSP).
  • .
  • .
  • .

 

You may be required to provide a range of documentation and references to prove your abilities and experience during your evaluation process for Canadian Immigration.

Start Your Evaluation

Step 3: Start the Migration Process, apply for your Canada Visa

There are many routes you can take when moving to Canada as a Non-destructive tester or inspection technician but we’ve listed the top 4 ways that will give you the greatest chances of success in the application process:

 

  1. Express Entry system
  2. Provincial Nominee Program
  3. The Rural and Northern Immigration Program
  4. The Atlantic Immigration Pilot

 

1. Express Entry

The Express Entry (EE) system is our top choice for moving to Canada as a Non-destructive tester or inspection technician. Not only is it the fastest but it is also one of the simplest ways to immigrate to Canada. With the right age, language skills in French and/or English, qualifications and other criteria you could be moving to Canada fast, you could be on your way to Canada in 6 months.

 

The first stage in your Canadian Express Entry immigration process is to calculate your Canada Immigration points for Express Entry using the Canadian Comprehensive Ranking System (CRS).

 

Some of the elements that CRS Points are awarded for include:

 

  • Age
  • Qualifications
  • English ability
  • French ability
  • Your partner’s skills
  • Work experience

 

Take our free online visa assessment for an up to date report on whether you have enough points to move to Canada as a Non-destructive tester or inspection technician from both an Express Entry and Immigration points perspective.

 

2. Provincial Nominee Program

 

The Provincial Nominee Program (PNP) allows skilled and semi-skilled immigrants to live and work in Canada. You will need a valid job offer in Canada of at least 1 year for most immigration streams. 11 provinces and territories have their own PNPs, each with their own with specific labor needs.

 

If your skills match what your chosen province or territory is looking for, you may receive a provincial nomination, which is worth 600 extra Permanent Residency points which means that you’re practically assured of an offer for Canadian permanent residence.

 

3. The Rural and Northern Immigration Pilot

 

Seeing as Non-destructive testers and inspection technicians are in-demand you may be eligible to immigrate to Canada through the Rural and Northern Immigration Pilot (RNIP). There are 11 participating communities currently participating in the pilot program. You will need a valid job offer in one of the participating communities to be considered eligible to apply for Canadian permanent residency through the RNIP.

 

4. The Atlantic Immigration Pilot

 

The Atlantic Immigration Pilot allows intermediate to highly and semi-skilled foreign workers to move to Canada’s Atlantic provinces and seeing as Non-destructive testers and inspection technicians are in high need in the 4 Atlantic provinces, you may be eligible to apply if you have a valid job offer for at least 1 year.

Step 4: Apply for a Non-destructive tester or inspection technician Job in Canada

As a highly skilled worker, it is not a requirement that you have a job to be able to immigrate to Canada but it will make it faster. It will help with the immigration process as you can earn between 50 and 200 PR points for a valid job offer.  This moves you ahead in the pool of candidates, as the more points you have the more chance you have of receiving an invitation in one of the many offer rounds made within the Canada Visa System.

 

Non-destructive testers and inspection technicians in Canada are described as doing the following:

 

 

  • Set up and calibrate non-destructive testing equipment
  • Conduct tests to ensure quality or detect discontinuities (defects) using ultrasonic radiographic liquid penetrant magnetic particle eddy current and other non-destructive testing methods
  • Establish techniques for proper examination of objects under inspection ensuring strict adherence to safety regulations
  • Interpret radiographs cathode ray tube (CRT) or digital readouts conductivity meters and visual indicators
  • Apply testing criteria in accordance with applicable specifications or standards and evaluate results
  • Organize and report test results
  • May perform specialized inspections using acoustic emission vibration analysis infrared thermography and laser shearography testing methods
  • May instruct and supervise trainees.
  • Conduct initial and regular inspections of establishments and individuals holding or applying for air carrier operating certificates and establishments engaged in aircraft maintenance repair or modification
  • Inspect aircraft advise of any deficiencies and detain aircraft suspected of being unairworthy or unsafe.

 

 

You can expect to see these terms in Job ads in Canada for Non-destructive testers and inspection technicians along with the following common tasks, duties and responsibilities of Non-destructive testers and inspection technicians in Canada.

 

There has never been a better time to get moving to Canada as a Non-destructive tester or inspection technician.

If you are looking to apply to move to Canada in a different occupation, you can find the information on our Canada Skilled Immigration Guides page.

If you are looking for a job in Canada – you can find a guide on each occupation and the job application procedure for Canada on our Canada Job Guides index.

As mentioned above you will need to attend the Canadian Embassy nearest you during your application process to live in Canada as a Non-destructive tester or inspection technician.  You can find the complete list of all Canadian Embassies Worldwide here.

Useful links for Non-destructive testers and inspection technicians moving to Canada