Immigrate to Canada as a Plastic products assembler finisher or inspector

Immigrate to Canada as a a Plastic products assembler finisher or inspector

Immigrate to Canada as a a Plastic products assembler finisher or inspector

Plastic products assemblers finishers and inspectors are in demand right across Canada and you may be able to secure a Canadian Permanent Residency Visa either with or without a job offer.

 

There are thousands of Plastic products assemblers finishers and inspectors just like you moving to Canada. Find out how to join them.  Canada needs more Plastic products assemblers finishers and inspectors.  If you are thinking about moving to Canada as a Plastic products assembler finisher or inspector, all the information you need is right here.

Moving to Canada as a Plastic products assembler finisher or inspector

Moving to Canada as a Plastic products assembler finisher or inspector

Plastic products assemblers finishers and inspectors are wanted in Canada

Did you know that Plastic products assemblers finishers and inspectors are one of the most in-demand jobs in Canada? Plastic products assemblers finishers and inspectors are in high demand in all 11 of Canada’s provinces and territories, and as a highly-skilled professional, you can expect to earn between $81400 and $105300 per year.

 

When considering Canada as your new home, there are not only numerous immigration options for you to choose from, but plenty of job opportunities too.

Jobs in Canada for Plastic products assemblers finishers and inspectors

One of the biggest questions when moving to Canada is “will I be able to find work as a Plastic products assembler finisher or inspector in Canada?”. The simple answer is Yes, you will!  (Of course each Plastic products assemblers finishers and inspectors level of training and experience is a core factor, as is the case in any country.)

 

Below are answers to some of the most frequently asked questions about jobs in Canada for Plastic products assemblers finishers and inspectors.

Is There Really a Demand for Plastic products assemblers finishers and inspectors in Canada?

Yes there is! As mentioned previously, you can immigrate to Canada as an experienced Plastic products assembler finisher and inspector with a high chance of finding employment in any of Canada’s 11 provinces. These job opportunities can be found in:

 

  • Alberta
  • British Columbia
  • Manitoba
  • New Brunswick
  • Newfoundland and Labrador
  • Nova Scotia
  • Ontario
  • Prince Edward Island
  • Quebec
  • Saskatchewan

 

Over the next few years, it is estimated that there will be 21000 new jobs created due to expansion and a need for replacement as well as 28000 new positions for graduates and immigrants to fill who want to live and work in Canada.

 

This is why Canada needs Plastic products assemblers finishers and inspectors.  You really can be moving to Canada as a Plastic products assembler finisher or inspector

How Much Do Plastic products assemblers finishers and inspectors Earn in Canada?

Salaries in Canada are very competitive and, as an experienced Plastic products assembler finisher and inspector, you can expect to earn between $81400 and $105300 per year.

How do I search for Plastic products assembler finisher and inspector positions in Canada?

Most Plastic products assembler finisher and inspector jobs in Canada are advertised online on jobs sites.  Often, a code is used to identify Plastic products assembler finisher and inspector jobs.  These codes are used across Canada to identify all kinds of occupations.

 

The codes are called NOC codes.  The NOC code for Plastic products assembler finisher and inspector is 9535.  There are a range of positions that are associated with Plastic products assemblers finishers and inspectors.

 

These are occupations many Plastic products assemblers finishers and inspectors also participate in.  If you work in or are employed as any of the following positions, you are covered by the overarching noc code of 9535 for Plastic products assemblers finishers and inspectors

 

Plastic products assemblers finishers and inspectors assemble finish and inspect plastic parts and finished products. They are employed by plastic products manufacturing companies and plastic parts divisions of aircraft or other manufacturing companies.;

 

Further Positions within the term of Plastic products assembler finisher and inspector include:

 

  • Aircraft parts assembly repairer – plastic products manufacturing
  • Aircraft plastic panelling assembler
  • Aircraft plastic parts trimmer-assembler
  • Assembly inspector – plastic manufacturing
  • Assembly line inspector – plastic manufacturing
  • Atomizer cap machine tender
  • Automotive door panelling assembler – plastic products manufacturing
  • Blister former – plastic products manufacturing
  • Buffing machine operator – plastic manufacturing
  • Cellophane finisher – plastic manufacturing
  • Compact disc inspector – plastic products manufacturing
  • Composite material laminator
  • Cooler shell assembler – plastic products manufacturing
  • Dicer tender – plastic manufacturing
  • Dicing machine tender – plastic manufacturing
  • Fibreglass filter assembler
  • Fibreglass inspector
  • Fibreglass laminator
  • Fibreglass layup man/woman – plastic manufacturing
  • Fibreglass layup worker – plastic manufacturing
  • Finisher-grinder – plastic manufacturing
  • Floorcovering inset cutter – plastic manufacturing
  • Foam cushion production repairer – plastic products manufacturing
  • Foam cushion reinforcer – plastic products manufacturing
  • Hand belt laminator – plastic products manufacturing
  • Linoleum inspector
  • Linoleum line inspector
  • Linoleum quality control inspector
  • Luggage binding assembler – plastic products manufacturing
  • Marine craft plastic panelling assembler
  • Mould filler-stripper – plastic manufacturing
  • Mould laminator – plastic manufacturing
  • Mould stripper – plastic manufacturing
  • Mould waxer – plastic manufacturing
  • Moulded plastic finisher
  • Moulded plastic inspector
  • Copper plater
  • Corrosion resistant metal sprayer

 

If your position is on the above list, you have found your relevant NOC Code, it is 9535

How Do I Move to Canada to Live and Work as a Plastic products assembler finisher or inspector?

Step 1 : Determine you are eligible to immigrate

The simplest way to do this is to take our free visa assessment.  There are more than 80 visa pathways to Canada.  Once you take your visa assessment we will be able to guide you as to which is the best path for your particular circumstances.

Step 2: Have Your Qualifications Accredited for Canada

In order to live and work in Canada as a Plastic products assembler finisher or inspector, you will need to have your qualifications that you earned outside of Canada accredited and ensure that it is recognized in Canada.

 

An Educational Credential Assessment (ECA) confirms that your degree, diploma or certificate is both valid and equal to Canadian standards. This is vital as it will allow you to claim the Permanent Residency points for your education and training and might also be required for employment, professional registration within Canada and Canadian immigration services.

 

Below is a list of designated organizations that are  licensed to do your assessment:

 

  • Comparative Education Service – University of Toronto School of Continuing Studies;
  • International Credential Assessment Service of Canada;
  • World Education Services;
  • International Qualifications Assessment Service (IQAS); and
  • International Credential Evaluation Service.

 

Educational and experience requirements for Plastic products assemblers finishers and inspectors include:

 

  • Some secondary school education is usually required.
  • Experience as a labourer in the same company may be required for assemblers finishers and inspectors.
  • On-the-job training is provided.
  • .
  • .
  • .
  • .

 

You may be required to provide a range of documentation and references to prove your abilities and experience during your evaluation process for Canadian Immigration.

Start Your Evaluation

Step 3: Start the Migration Process, apply for your Canada Visa

There are many routes you can take when moving to Canada as a Plastic products assembler finisher or inspector but we’ve listed the top 4 ways that will give you the greatest chances of success in the application process:

 

  1. Express Entry system
  2. Provincial Nominee Program
  3. The Rural and Northern Immigration Program
  4. The Atlantic Immigration Pilot

 

1. Express Entry

The Express Entry (EE) system is our top choice for moving to Canada as a Plastic products assembler finisher or inspector. Not only is it the fastest but it is also one of the simplest ways to immigrate to Canada. With the right age, language skills in French and/or English, qualifications and other criteria you could be moving to Canada fast, you could be on your way to Canada in 6 months.

 

The first stage in your Canadian Express Entry immigration process is to calculate your Canada Immigration points for Express Entry using the Canadian Comprehensive Ranking System (CRS).

 

Some of the elements that CRS Points are awarded for include:

 

  • Age
  • Qualifications
  • English ability
  • French ability
  • Your partner’s skills
  • Work experience

 

Take our free online visa assessment for an up to date report on whether you have enough points to move to Canada as a Plastic products assembler finisher or inspector from both an Express Entry and Immigration points perspective.

 

2. Provincial Nominee Program

 

The Provincial Nominee Program (PNP) allows skilled and semi-skilled immigrants to live and work in Canada. You will need a valid job offer in Canada of at least 1 year for most immigration streams. 11 provinces and territories have their own PNPs, each with their own with specific labor needs.

 

If your skills match what your chosen province or territory is looking for, you may receive a provincial nomination, which is worth 600 extra Permanent Residency points which means that you’re practically assured of an offer for Canadian permanent residence.

 

3. The Rural and Northern Immigration Pilot

 

Seeing as Plastic products assemblers finishers and inspectors are in-demand you may be eligible to immigrate to Canada through the Rural and Northern Immigration Pilot (RNIP). There are 11 participating communities currently participating in the pilot program. You will need a valid job offer in one of the participating communities to be considered eligible to apply for Canadian permanent residency through the RNIP.

 

4. The Atlantic Immigration Pilot

 

The Atlantic Immigration Pilot allows intermediate to highly and semi-skilled foreign workers to move to Canada’s Atlantic provinces and seeing as Plastic products assemblers finishers and inspectors are in high need in the 4 Atlantic provinces, you may be eligible to apply if you have a valid job offer for at least 1 year.

Step 4: Apply for a Plastic products assembler finisher or inspector Job in Canada

As a highly skilled worker, it is not a requirement that you have a job to be able to immigrate to Canada but it will make it faster. It will help with the immigration process as you can earn between 50 and 200 PR points for a valid job offer.  This moves you ahead in the pool of candidates, as the more points you have the more chance you have of receiving an invitation in one of the many offer rounds made within the Canada Visa System.

 

Plastic products assemblers finishers and inspectors in Canada are described as doing the following:

 

 

  • Plastic products assemblers and finishers
  • Operate machines or equipment or use hand tools to cut shape splice and fit plastic materials to form parts and assemblies
  • Assemble composite materials on patterns to form parts and assemblies using bonding agents
  • Operate spray-gun unit to apply resin mixtures to metal or wooden mould to form plastic products
  • Load and operate autoclave oven to cure and bond plastic and composite parts and subassemblies
  • Operate finishing equipment to trim grind or buff plastic products into final form.
  • Clean and maintain painting and coating ventilation compressed air and personal protective equipment
  • May prepare and apply stencils computer-generated decals or other decorative items on finished products.
  • Check manufactured items for defects and for conformance to specifications visually or using sample models and instruments
  • Affix seals or tags to approved items and return defective products for repair or recycle

 

 

You can expect to see these terms in Job ads in Canada for Plastic products assemblers finishers and inspectors along with the following common tasks, duties and responsibilities of Plastic products assemblers finishers and inspectors in Canada.

 

There has never been a better time to get moving to Canada as a Plastic products assembler finisher or inspector.

If you are looking to apply to move to Canada in a different occupation, you can find the information on our Canada Skilled Immigration Guides page.

If you are looking for a job in Canada – you can find a guide on each occupation and the job application procedure for Canada on our Canada Job Guides index.

As mentioned above you will need to attend the Canadian Embassy nearest you during your application process to live in Canada as a Plastic products assembler finisher or inspector.  You can find the complete list of all Canadian Embassies Worldwide here.

Jacqueline Chow is an international immigration and visa expert with over 15 years of experience in the field. With a background in law and a passion for helping people, Jacqueline has built a reputation as a trusted and reliable source of information and advice on all aspects of immigration and visas. She has worked with clients from all over the world, including high-net-worth individuals, professionals, skilled workers and families. As a sought-after speaker and commentator Jacqueline has been featured in various media outlets and has given talks on immigration and visas at conferences and events around the world.